Pioneer AVIC-D3 Owner's Manual - Page 143

NAVI/AV • If a route calculation is operated within an areas not stored on the disc, the route might not be set from the streets you are currently driving. Also, if you set the destination in an area not stored on the disc of the disc, the system may not be able to set the route up to the destination. • If the vehicle deviates from the set route in an area not stored on the disc, the Auto Reroute function will not work. • Even if "Close-up of Junction" is "On", the display will not switch to an enlarged map of the junction. • Even if you drive on the freeway, lane information, freeway exit numbers and freeway signs will not be displayed. ❒ A set Areas to Avoid may be deleted when the software is updated. If this happens, the system will automatically try to recover the deleted information, but data can be recovered only for areas stored on the disc. For items that could not be recovered, a recovery process will begin when you set another disc. Route information • If the set route goes through an area not stored on the disc, no route profile for that area will be displayed. (If the set route traverses both an area not stored on the disc and area stored on the disc, only the route profile within the area stored on the disc will be displayed.) • Route scrolling for an area not stored on the disc is possible only with a map scale of 0.5 mi or above. Other function limitations Overlay POI • Only display "City Center" is available in an area not stored on the disc. Memory mode • Only data for areas stored on the disc can be memorized. (Data for areas not stored on the disc cannot be memorized.) • If the vehicle enters an area not stored on the disc, preparation for memory navi mode will have to be redone after the vehicle returns to an area stored in the disc. (Preparation for the memory navi mode starts from the location where the vehicle re-entered the area stored on the disc.) Avoid area • An area not stored on the disc cannot be set as an Areas to Avoid. Appendix 141