Pioneer AVIC-D3 Owner's Manual - Page 163

NAVI/AV Tracking Dots on the map indicating the route you have traveled. VBR VBR is short for variable bit rate. Generally speaking CBR (constant bit rate) is more widely used. But by flexibly adjusting the bit rate according to the needs of the audio compression, it is possible to achieve compression with a priority on sound quality. Voice guidance The giving of directions by a recorded voice in guidance mode. Way Point A location that you choose to visit before your destination; a journey can be built up from multiple way points and the destination. WMA WMA is short for Windows Media™ Audio and refers to an audio compression technology that is developed by Microsoft Corporation. WMA data can be encoded by using Windows Media Player version 7 or later. Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. Specifications General Rated power source 14.4 V DC (allowable voltage range: 12.0 V to 14.4 V DC) Grounding system Negative type Max. current consumption 10.0 A Display unit: Dimensions (W ✕ H ✕ D): D Chassis 178 ✕ 100 ✕ 165 mm (7 ✕ 3-7/8 ✕ 6-1/2 in.) Nose 170 ✕ 97 ✕ 8 mm (6-3/4 ✕ 3-7/8 ✕ 3/8 in.) Weight 2.2 kg(4.9 lbs) Navigation GPS Receiver: System L1, C/Acode GPS SPS (Standard Positioning Service) Reception system ........ 8-channel multi-channel reception system Reception frequency ... 1 575.42 MHz Sensitivity 130 dBm Position update frequency Approx. once per second GPS antenna: Antenna Micro strip flat antenna/ right-handed helical polarization Antenna cable 5.0 m(16 ft. 5 in.) Dimensions (W ✕ H ✕ D) 33 ✕ 14 ✕ 36 mm (1-1/4 ✕ 1/2 ✕ 1-3/8 in.) Weight 105 g(0.23 lbs) Display Screen size/aspect ratio ..... 6.1 inch wide/17:9 (effective display area: 136 ✕ 72 mm) Pixels 336 960 (480 ✕ 234 ✕ 3) Type TFT active matrix, transmissive type Color system NTSC Operating temperature range 22 °F to +185 °F Storage temperature range 40 °F to +185 °F Audio Continuous power output is 22 W per channel minimum into 4 ohms, both channels driven 50 to 15 000 Hz with no more than 5% THD. Maximum power output ..... 50 W ✕ 4 50 W ✕ 2 ch/4 Ω + 70 W ✕ 1 ch/2 Ω (for subwoofer) Load impedance 4 Ω (4 Ω to 8 Ω [2 Ω for 1 ch] allowable) Appendix 161