Pioneer AVIC-D3 Owner's Manual - Page 37

NAVI Chapter 2 Navigation Menu and Map Display : Volume Setting The sound volume for the navigation can be set. ➲ Setting the guidance volume ➞ Page 71 ❒ If the mode is selected by pressing the MAP button, the screen automatically switches to the selected map display mode after 4 seconds. : Menu Close Hides the shortcut menu. How to view the map of the current location How to Use the Map Most of the information provided by your navigation system can be seen on the map. You need to get to know how the information that appears on the map. Switching the current position screen display mode There are four types of map display and two additional view modes. • Map View • Driver's View • Guide View (during route guidance only) • Route View (during route guidance only) • Vehicle Dynamics • Rear View (Only possible when the "Camera" is set to "On".) ❒ If you deviate from the route when the view mode is Route View or Guide View and enter a street not recorded on the disc, the screen changes to Map View. When you return to the route, the screen returns to the original view and resumes route guidance. 1 Press the MAP button to display a map of the area around your current position. 2 Press the MAP button again. 3 Touch the mode name or press the MAP button to select the mode you want to display. Map View Displays the standard map. (1) (2) (4) (11) (10) (8) (7) (16) (5) (12)(3) (9) (17)(6) Driver's View Displays the map from the driver's viewpoint. (1) (10) (8) (2) (7) (15) (4) (16) (11) (3) (12) (5) (9) (17)(6) • In Driver's View, a small gauge with no scale is depicted, but is not intended to be used as a speedometer. Use the actual speedometer of your vehicle to confirm speed. 35