Pioneer AVIC-D3 Owner's Manual - Page 89

AV RADIO Chapter 6 Using the AV Source (Built-in DVD Drive and Radio) 3 To perform manual tuning, touch or briefly. The frequencies move up or down step by step. 4 To perform seek tuning, keep touching or for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is found. You can cancel seek tuning by touching either or briefly. If you keep touching or you can skip broadcasting stations. Seek tuning starts as soon as you release the keys. Switching between the detail information display and the preset list display You can switch the left side of the basic screen according to your preference. 1 Touch "Detail" (or "Preset"). Each touch of "Detail" (or "Preset") changes the detail information display or preset list display. Preset list display Storing and recalling broadcast frequencies If you touch any of the preset tuning keys P1 (PRESET 1) - P6 (PRESET 6) you can easily store up to six broadcast frequencies for later recall with the touch of a key. Preset tuning keys (P1 - P6) 1 When you find a frequency that you want to store in memory, keep touching a preset tuning key P1 - P6 until the preset number (e.g., P.CH 1) stops flashing. The number you have touched will flash in the preset number indicator and then remain lit. The selected radio station frequency has been stored in memory. ❒ Up to 18 FM stations, 6 for each of the three FM bands, and 6 AM stations can be stored in memory. 2 The next time you touch the same preset tuning key P1 - P6, the radio station frequency is recalled from memory. ❒ You can also use  and  to recall radio stations frequencies assigned to preset tuning keys P1 - P6. Detail information display 87