Toshiba Tecra 8200 User Guide - Page 200
Setting a user-level password in TSETUP, Connecting, an external diskette drive
View all Toshiba Tecra 8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 200 highlights
200 Keeping Your Files Safe User-level passwords 4 You must restart your computer in order for changes to take effect. Your user password is now in effect. Use it when you start the computer (power-on password), or when you use the hot key Fn + F1 (instant password). Setting a user-level password in TSETUP HINT: If you forget your password and have lost your password service diskette, contact the Toshiba InTouch Center (US telephone number (800) 457-7777). To register a user-level password in TSETUP and create a password service diskette: 1 Click Start, then Shut Down. Select Shut down and click OK. The computer shuts down and turns itself off. 2 Connect your diskette drive. For instructions, see "Connecting an external diskette drive" on page 64 or "Inserting a module into the SelectBay" on page 76, depending upon the type of diskette drive you have. 3 Insert a write-enabled diskette into the diskette drive. HINT: Run TSETUP outside Windows, at a system prompt. If you try to run TSETUP from an MS-DOS session under Windows, results can be unpredictable. 4 Slide the power button cover on the left side of the computer toward the rear, revealing the power button. On 5 Hold down the Esc key and press and hold the power button in until the on/off light on the system indicator panel turns on