Toshiba Tecra 8200 User Guide - Page 63
Connecting a local printer, PS/2 mouse with Windows NT
View all Toshiba Tecra 8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Connecting Other External Devices Connecting a local printer 63 PS/2 mouse with Windows NT To set the PS/2 mouse to work simultaneously with the AccuPoint II: 1 Click Start, select Programs, then select Toshiba Utilities. 2 Click Hardware Setup, click the Hardware Options button, then select the Pointing Devices tab. 3 Select the Simultaneous radio button, then click OK. Your computer will prompt you to reboot in order for your changes to take effect. Connecting a local printer CAUTION: Never connect the printer cable while the computer's power is on. Doing so may damage the printer, the computer, or both. Before you can connect a printer, you need to know whether it uses a serial or a parallel interface. Check the printer's documentation. If the printer can be switched between serial and parallel mode, choose parallel because it is faster. You also need a suitable printer cable, which may come with your printer. Otherwise, you can purchase one from a computer or electronics store. NOTE: If your printer is ECP- or IEEE-compliant, make sure your printer cable is an IEEE 1284 cable. These instructions assume you have a parallel printer, which is the most common type of interface.