Xerox 8500DN Service Manual - Page 133

General Troubleshooting Menu Item Reset NVRAM Power Saver Timeout Reset Printer Head Adjust Adjust X-Axis scale Drift Compensation Head-to-Drum Adjust Wiper adjust (8500) Purge adjust (8500) Reset Ink Loader (8500) Service Usage Profile Print OCR Usage Profile Engine Copy Count Head Serial Number Head Cal Date Head Version Engine Firmware Version 2-Sided Printing Oil Chase Envelope Oil Chase Center Image (8400) Exit Description Provides access to reset the printer back to its factory-default settings and erase all network settings. If possible, print the Configuration Page before resetting NVRAM. Selects the Power Saver Timeout, the amount of time the printer must be idle before changing to Power Saver low-energy consumption mode, per ENERGY STAR\256 guidelines. Resets all items in the Printer Controls menu to their default values. This is for manufacturing or engineering use only. This is for manufacturing or engineering use only. This is for manufacturing or engineering use only. This is for manufacturing or engineering use only. Adjusts the tension on the wiper blade (for engineering use only). When replacing a purge pump different than the manufactured pump, you may need to adjust the amount of pressure in the pump using this menu item. Resets the ink loader ink stick count. Prints pages with detailed printer-usage information. Prints using a font optimized for FAX. Displays engine copy count. Displays the printhead serial number. Displays the date the printhead was calibrated. Displays the printhead version. Displays the engine firmware version. Enables a chase page to follow a 2-sided printing job. Enables a chase page to follow an envelope print job. Centers the image by adjusting the margin (not operational). Exits the Hidden Service Diagnostics Menu and returns to the previous menu. Phaser 8400/8500/8550/8560 Color Printer Service Manual 4-3