Xerox 8500DN Service Manual - Page 302

Service Parts Disassembly Paper Path Exit Module (PL3.0.13) Caution The Drum Temperature Sensor harness is routed through the Exit Module. Use care during removal to avoid damaging the sensor. 1. Remove the Exit Cover (page 8-6). 2. Remove 3 screws securing the Media Drive, and let the motor hang. 3. Disconnect 3 connectors: two on the right (I/O Board J680 and J870) and one on the left. 4. Remove the 4 screws holding the Exit Module to the printer chassis and remove the Exit Module. Note You may need to remove the Media Drive to access the screw. s8500-132 Replacement Note Seat the Exit Module on the chassis. Torque the 4 screws to 15 in. lbs. After installing the Exit Module, perform the Wiper Alignment (page 6-2). The printer may report error 7,009.4x if the Wiper Assembly is misaligned. 8-32 Phaser 8400/8500/8550/8560 Color Printer Service Manual