Xerox 8500DN Service Manual - Page 307

Pick Assembly (PL3.0.10) Service Parts Disassembly Note Replace the Retard Roller at the same time you replace the Pick Assembly. 1. Remove Tray 2 from the printer. 2. Reach into the tray cavity and release the orange colored catch holding the Pick Roller in place. The catch is located on the ceiling of the tray cavity about 1/4 of the way across the unit from the right side and about 12.5 cm (5 inches) back. When you pull forward on the catch, the roller will swing down. 1 2 3. Pull down to remove the roller. s8500-101 Replacement Note Insert the replacement with the metal shaft at the top and toward the left, the grey rollers should face you. Position the roller back about 5 cm (2 inches) in the tray cavity. Push the Pick Assembly up into the chassis and snap it into place. Then, rotate the Pick Assembly up and back to latch. Phaser 8400/8500/8550/8560 Color Printer Service Manual 8-37