Xerox 8500DN Service Manual - Page 289
Stripper Carriage (PL2.0.12) and Transfix Roller (PL2.0.13), Disconnect P/J250 from the I/O Board.
UPC - 095205022063
View all Xerox 8500DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 289 highlights
Service Parts Disassembly Stripper Carriage (PL2.0.12) and Transfix Roller (PL2.0.13) Caution Hold the Transfix Roller and Stripper Carriage with one hand during removal of the Transfix Roller shaft to prevent the Transfix Roller from falling and damaging the printer. Also, do not use the Transfix Roller Shaft Restraint as a lever to pry the shaft. Doing so can bend the restraint. 1. Remove the Right Side Cover (page 8-5). 2. Disconnect P/J250 from the I/O Board. 3. Remove the Control Panel Cover (page 8-5). 4. Remove 2 screws securing the I/O Board to the chassis, slide the board towards the rear, and move the board out of the way. 5. Loosen 1 screw securing the Transfix Roller Shaft Restraint and remove the restraint. 6. Use the end of the Transfix Roller shaft restraint to remove the shaft. 7. Remove the Stripper Carriage and Transfix Roller. Phaser 8400/8500/8550/8560 Color Printer Service Manual s8500-083 8-19