Xerox 8500DN Service Manual - Page 248
Black, Red, Green, Blue, Cyan, Magenta, and Yellow Solid Fills
UPC - 095205022063
View all Xerox 8500DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 248 highlights
Print-Quality Troubleshooting Black, Red, Green, Blue, Cyan, Magenta, and Yellow Solid Fills These prints show uniformity of fill. Check for the following: 1. Even, uniform fills throughout the print. 2. There should be no wrinkling or deformity of the paper throughout the print. 3. Poor transfer on one side. 4. Repeating white stripes. . s8500-056 Primary causes: 1. Weak jets or uneven Drum heating may cause uneven fills. 2. To solve wrinkling, try different print media. Replace the Drum Maintenance Kit to correct streaking. Check the Drum Temperature Sensor for debris build-up on the sensor or the sensor is not in proper contact with the Drum. See the Reverse Text test print on page 5-37. 3. If there is poor transfer on one side, check to see if the transfix load arm assemblies are moving easily. Clean any contamination that may be interfering with the Transfix Arm movement. If either of the Transfix Arm assemblies are worn, replace the arm. If there are repeating white stripes on the print, there may be a problem with the X-Axis motion, see "White Stripes (Pinstripes)" on page 30. 5-42 Phaser 8400/8500/8550/8560 Color Printer Service Manual