Xerox 8500DN Service Manual - Page 292
Transfix Load Module (PL2.0.15), Transfix Load Module
![]() |
UPC - 095205022063
View all Xerox 8500DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 292 highlights
Service Parts Disassembly Transfix Load Module (PL2.0.15) 1. Remove the Front Door (page 8-4). 2. Remove the Ink Loader (page 8-7). 3. Remove the Preheater (page 8-20). 4. Remove the Media Drive (page 8-40). 5. Remove 4 screws, disconnect 2 connectors, and remove the Exit Module (page 8-32). 6. Remove the Upper and Lower Duplex Guides (page 8-33). 7. Remove the Duplex Roller by removing the left KL-clip on the shaft and sliding the left side bearing down the shaft toward the right. Then slide the shaft toward the left to free the right end of the shaft. Finally, pull the shaft out towards the right side. 8. Insert a T-20 Torxbit through the slotted hole in the Transfix Load Module, engage the hole on the back of the module, and gently lever the module's spring cam toward the center of the printer to release/unhook the spring hooks from the Transfix Load Arms. Slowly relax the lever to return the spring cam to the relaxed position. Caution Ensure that you lever the spring cam towards the center. Applying the pressure in the wrong direction can damage the Transfix Load Module. Also, placing too much force in the leverage action could destroy the cam. Transfix Load Module s8500-087 8-22 Phaser 8400/8500/8550/8560 Color Printer Service Manual
![](/manual_guide/products/xerox-8500dn-service-manual-25944ce/292.png)