Xerox 8500DN Service Manual - Page 306
Take Away Roller (PL3.0.7), Take Away Roller, Bushing, KL-Clip
UPC - 095205022063
View all Xerox 8500DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 306 highlights
Service Parts Disassembly Take Away Roller (PL3.0.7) 1. Remove the Right Side Cover (page 8-5). 2. Remove the Left Side Cover (page 8-5). 3. Remove the Media Drive (page 8-40). 4. Remove the Lower Simplex Guide (page 8-33). 5. Remove the KL-clip from the right end of the shaft. 6. Remove the KL-clip and bushing from the left end of the shaft. 7. Move the Take Away Roller shaft to the left side to release it from the right side frame, rotate the shaft forward, and remove it to the right. Note Pressure from the idler rollers makes it difficult to move the Take Away Roller shaft to the right during removal. KL-Clip Take Away Roller Bushing s8500-100 Replacement Note First remove the tray. Next, rotate the Pick Roller Shaft until the clutch seats. Working upwards, rotate the Take Away Roller and Duplex Roller until all shafts seat properly. Check that the Media Drive is correctly positioned on the side frame. Install and torque the 6 screws to 12 in. lbs. Finally, check that all rollers rotate freely. 8-36 Phaser 8400/8500/8550/8560 Color Printer Service Manual