Xerox 8500DN Service Manual - Page 277

Ink Loader (PL1.0.8) Service Parts Disassembly 1. Remove the Right Side Cover (page 8-5). 2. Remove the Left Side Cover (page 8-6). 3. Remove the Exit Cover (page 8-6). 4. Lift the Ink Loader clear of the chassis and hold it in position against the rear of the chassis to allow access to the connectors. For 8400, the Ink Loader disconnects from the printer frame. For 8500/8550/8560, the harness that plugs into the right side frame disconnects directly from the Ink Loader. Note Hooks on the bottom of the Ink Loader allow it to hang on the rear of the printer chassis while the connectors are removed. 5. Disconnect the 2 connectors from the printer and remove the Ink Loader. 8400 8500/8550/8560 s8500-069 Replacement Note For the 8400, route the gray harness from the chassis between the Ink Loader and printer side. The harness from the Ink Loader must be routed towards the left side (see inset). For the 8500/8550/8560, the harness comes from the side of the chassis and plugs directly into the Ink Loader. After replacing the 8500/8550/8560 Ink Loader, reset the ink stick count, using the Hidden Service Menu. Phaser 8400/8500/8550/8560 Color Printer Service Manual 8-7