Xerox 8500DN Service Manual - Page 263
Enabling Jet Substitution Mode (8500/8550/8560), Turn Jet Substitution Mode Off
UPC - 095205022063
View all Xerox 8500DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 263 highlights
Adjustments and Calibrations To correct print-quality problems, refer to the Eliminate Light Stripes test page to determine which jets are weak or missing. 1. Select Jet Substitution Mode, and then press the OK button. 2. Select Jet Select, and then press the OK button. 3. Scroll to the color for the weak or missing jet, and then press OK to select the color. 4. Use the Up Arrow and Down Arrow buttons to select the number of the weak or missing jet, and then press OK to confirm the selection. 5. Select Save Change and Exit, and then press OK to complete the procedure. 6. After substituting a jet, print the Light Stripes Test page to verify the problem has been solved. At the bottom of the page, a Service Mode key summarizes the number of substituted jets for each color. Note The Configuration and Printer Status pages also list jets in Service Mode (substituted). Enabling Jet Substitution Mode (8500/8550/8560) To select Jet Substitution Mode for 8500/8550/8560 models: 1. Select Troubleshooting, and then press the OK button. 2. Select Print Quality Problems, and then press the OK button. 3. Select Eliminate Light Stripes, and then press the OK button. 4. Select Jet Substitution Mode, and then press the OK button. 5. Follow the prompts to select the color and malfunctioning jet number indicated on the Light Stripes Test page. Disabling Jet Substitution Mode (8400) Note Turn Jet Substitution Mode Off will only become available if Jet Substitution Mode has been turned on. If the option to turn off is not available then Jet Substitution Mode is not turned on. After the Printhead is replaced, disable Jet Substitution Mode to restore normal operation. Using the hidden Jet Substitution Mode Menu, select Jet Select. 1. Select Troubleshooting, and then press the OK button. 2. Select Print Quality Problems, and then press the OK button. 3. Press and hold the Up Arrow button, and then press the Back button. 4. Select Jet Substitution Mode, and then press the OK button. 5. Select Jet Select, and then press the OK button. 6. Select Turn Jet Substitution Mode Off, and then press the OK button. 7. Select Print the Eliminate Light Stripes to print the test page and verify that Service Mode is disabled for all jets. Phaser 84000/8500/8550/8560 Color Printer Service Manual 6-13