Xerox 8500DN Service Manual - Page 278
Imaging, Y-Axis Belt, Y-Axis Tension Spring, and Y-Axis Motor
![]() |
UPC - 095205022063
View all Xerox 8500DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 278 highlights
Service Parts Disassembly Imaging Y-Axis Belt, Y-Axis Tension Spring, and Y-Axis Motor (PL 2.0.4) (PL 2.0.14) (PL 4.0.4) Warning The use of safety glasses is recommended for this procedure. 1. Remove the Left Side Cover (page 8-6). 2. Relieve tension on the belt by pulling the end of the spring arm toward the front of the printer using your fingers. 3. Slide the belt off the pulley. Y-Axis Belt 3 4 Y-Axis Tension Spring 2 s8500-070 4. Using a spring hook or pliers, remove the Y-Axis Tension Spring from the chassis retainer and spring arm. Brace the printer to keep it from moving during removal of the spring. Caution This is a strong spring that can cause damage if it slips during removal; use care when removing. 5. Move the wires out of the way. 6. Disconnect the motor harness. 8-8 Phaser 8400/8500/8550/8560 Color Printer Service Manual
![](/manual_guide/products/xerox-8500dn-service-manual-25944ce/278.png)