Xerox 8500DN Service Manual - Page 239
Image Is Offset or Cut-Off, Poor Ink Adhesion, Poor Image Durability
UPC - 095205022063
View all Xerox 8500DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 239 highlights
Image Is Offset or Cut-Off Print-Quality Troubleshooting 1. Print an information page (internal page embedded in the printer). 2. Verify that the tray guides are adjusted correctly. 3. Ensure that the paper size settings for the driver and printer match the paper loaded in the tray. 4. Check the application for the correct image sizing and orientation. Poor Ink Adhesion, Poor Image Durability Follow these steps if the ink is flaking off the print after the print is complete. 1. If a specialty coated paper is being used (for example, glossy media), try a different paper. Xerox transparency film provides the best ink adhesion versus off-the-shelf transparency film. 2. Verify the Preheater temperature using diagnostics. 3. The Drum is too cold or too hot. Verify the Drum temperature using diagnostics. Ensure that the Drum Temperature Sensor is properly positioned and has no contamination between it and the Drum surface. Image durability is almost always an issue with the paper being used. It is never an issue with the printer's Printhead. Phaser 8400/8500/8550/8560 Color Printer Service Manual 5-33