Brother International EM550 Owners Manual - English - Page 54
Format, Memory
View all Brother International EM550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Notes: 1. The following messages are given priority if the specified problem is detected by the self diagnosis function: "RAM DOWN", "ROM DOWN", "CHECK PRINTER" 2 If you clear the Backup Ram, while the voltage of the battery is low, the following message will appear: d BACKUP MEMORY CLEARED (BATTERY LOW) 3. Change the battery once every 3 years. The new battery should be replaced while the typewriter is ON, otherwise the memory will be cleared. Line Format Memory This function allows you to create up to five typing formats and retain them for future use by specifying format values and storing them to memory. The format values that may be written to memory include the following (the numbers in parenthesis indicate the values to which these are set at shipment until modified by the user): •Left margin (10) •Right margin► (75) •Tab and decimal tab positions (none) •Pitch (10) •Line spacing (1) •Starting line (1 inch) •Ending line (none) Storing a line format in memory To store a line format to memory, hold the CODE key then press the FORMAT key to select a format number. Each time the CODE+ FORMAT keys are pressed, the format number changes on the status line. Set the desired format by setting the margins, tabs, pitch, line spacing, etc. These settings are now in effect for this format number. Notes: 1. A line format may not be stored while in the display mode. 2. The storage operation may be performed regardless of the position of the carrier. Calling a line format from memory Pressing the CODE + FORMAT keys will change the current format setting to the next setting in numerical order. The carrier will move to the new left margin and the format and counter values on the display will change to reflect the new values. -FORMATTW/WP PAGE LINE PITCH LINE KB IMPACT 4"TW►1 2 10 1 STD M 4 CEA