Brother International EM550 Owners Manual - English - Page 78

Editing During Printing A file may be interrupted for editing during printing either by pressing the CODE + STEP keys or with previously inserted stop codes; however, any text inserted in this way will not be saved to memory. Using the step function Pressing the CODE + STEP keys while a file is being printed will cause the carrier to finish the line it is on, carrier returns and stops at the left margin. The upper line of the display will prompt you with the following message and the cursor will appear on the bottom line. PLEASE INSERT TEXT OR CHANGE PAPER keyboard selection. A single line of text may now be entered. The display will change to the line by line mode to insert new text. The message "PLEASE INSERT TEXT OR CHANGE PAPER" will appear on the display after,a carrier return takes place. When additions have been completed, press the CODE + PRINT keys once again to resume printing. Stop codes When you know beforehand where changes will have to be made in a document, you can enter stop codes while typing. Printing will automatically stop where stop codes are entered and the message "STOP CODE" appears, and awaits your input. Please refer to the previous explanation of stop codes. The editing possibilities offered by the stop code are the same as those offered by the step function, and work in the same way. Using the skip function The skip function may be used to remove unnecessary text from a file during printing without removing the text from memory. Press the CODE + STEP keys to stop your typewriter temporarily during printing. Your typewriter will finish printing the line it is currently on, the carrier will return to the left margin, and the message "PLEASE INSERT TEXT OR CHANGE PAPER" will appear on the display. Using the