Canon MP370 MultiPASS MP370/360 Software Guide - Page 105
Advanced Mode - [Color] tab - Tone curve, In ScanGear MP Advanced Mode, follow the steps below.
UPC - 013803037111
View all Canon MP370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Advanced Mode - [Color] tab - Tone curve You can make subtle adjustments to the brightness of a specific area of an image by selecting the type of the tone curve, a graph showing the balance of tone input and output. The tone curve is active if [Color] or [Grayscale] is selected in [Color Mode] on the [Main] tab. In ScanGear MP Advanced Mode, follow the steps below. 1 Click [Reset] in [Auto tone]. 2 On the [Color] tab, click (Tone curve). 3 For a color image, in [Channel], select a color to adjust either [Red], [Green], or [Blue], or select [Master] to adjust the three colors together. 4 In [Select Special Curve], select the tone curve. 103
103
Advanced Mode - [Color] tab - Tone curve
You can make subtle adjustments to the brightness of a specific area of an image by selecting the
type of the tone curve, a graph showing the balance of tone input and output.
The tone curve is active if [Color] or [Grayscale] is selected in [Color Mode] on the [Main] tab.
In ScanGear MP Advanced Mode, follow the steps below.
1
Click [Reset] in [Auto tone].
2
On the [Color] tab, click
(Tone curve).
3
For a color image, in [Channel], select a color to adjust either [Red], [Green], or [Blue],
or select [Master] to adjust the three colors together.
4
In [Select Special Curve], select the tone curve.