Canon imageCLASS MF7460 imageCLASS MF7400 Series Reference Guide - Page 103

Before Using the Machine 1 Original and Paper 2 Copying 3 Sending and Receiving 4 Printing and Scanning 5 Network (imageCLASS 6 MF7480/MF7470 Only) Remote UI (imageCLASS 7 MF7480/MF7470 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 Table of Contents Index 7. Enter a name, then press [OK]. The maximum number of characters that you can enter for a key name is 10. The assigned name appears on the key. If you press [OK] without entering any characters, the key name reverts to its current name (M1 to M4). 8. Press [Cancel]. 9. Press [Done]. Pressing [Cancel] → [Done] only names the selected key ([M1] to [M4]), but does not recall the stored settings. If you press [OK] → [Done], the name is stored in the selected key ([M1] to [M4]), and the settings are recalled at the same time. Recalling Copy Settings 1. Press (COPY). 2. Press [Special Features]. 3. Press [Mode Memory]. Back Previous Next TOP 4. Select the key containing the copy settings that you want to recall. 5. Verify the settings, then press [OK]. 6. Press [Done]. If you select a key that does not have copy settings stored in it, [OK] is grayed out and cannot be pressed. Select another key that has copy settings stored in it, or press [Cancel]. - Recalling copy settings from memory cancels the current copy settings. - You can make changes to the recalled copy settings. - If you press another key, the copy settings stored in that key are recalled. Erasing Copy Settings 1. Press (COPY). 2. Press [Special Features]. 3. Press [Mode Memory]. 4. Press [Store/Erase]. 5. Press [Erase]. 3-32