Canon imageCLASS MF7460 imageCLASS MF7400 Series Reference Guide - Page 379
Set Use SNMP and Enable Dedicated Port for IPv4, canmfs FTP server UNIXr System V Release 4.0
View all Canon imageCLASS MF7460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 379 highlights
Before Using the Machine 1 Original and Paper 2 Copying 3 Sending and Receiving 4 Printing and Scanning 5 Network (imageCLASS 6 MF7480/MF7470 Only) Remote UI (imageCLASS 7 MF7480/MF7470 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 Detailed information concerning the machine cannot be set or browsed using the Remote UI or utility. Q Are the settings for IP Address Range Settings correct? A If the settings for IP Address Range Settings do not permit the IP address of a computer on which the Remote UI or utility is used, you cannot set the machine setting items or browse information on the machine. Check the settings for IP Address Range Settings. (See "IP Address Range Settings," on p. 6-35 or p. 6-44.) Q Are the settings for Receiving MAC Address Settings correct? A If the MAC address of a computer specified in Receiving MAC Address Settings is not correct, you cannot set the machine setting items or browse information on the machine. Check the settings for Receiving MAC Address Settings. (See "RX MAC Address Settings," on p. 6-39.) Q Is Use SNMP or Enable Dedicated Port (for IPv4 only) set to [Off]? A Set Use SNMP and Enable Dedicated Port (for IPv4 only) to [On]. (See "SNMP," on p. 6-6.) Q Does the SNMP community name match? Table of Contents Index Back Previous Next TOP A If you use an SNMP community name different from the one stored in the machine to access the machine from a utility, the utility will not detect the machine. In this case, check the SNMP community name. (See "SNMP," on p. 6-6.) Unable to send data/share files (FTP). Q Is the FTP server set correctly? A Check the following (if you are using Windows, perform these from the MS-DOS prompt): • Example using UNIX, where the FTP server has the IP address: 192.168.1.195 U:>ftp 192.168.1.195 *Connect to server Connected to 192.168.37.195. 220 canmfs FTP server (UNIX(r) System V Release 4.0) ready. User (192.168.37.195:(none)): user_name *User login 331 Password required for user_name. Password: *Enter password 230 User user_name logged in. ftp> cd /export/share *Move to data destination directory 250 CWD command successful. ftp> bin *Set data transfer type (binary) 200 Type set to I. ftp> put sample.tif *Set transfer file name for verification ftp> bye *Cut off server connection 221 Goodbye If the above are confirmed and file sharing still does not operate normally, consult the network administrator for the environment you are using. 10-49