Canon imageCLASS MF7460 imageCLASS MF7400 Series Reference Guide - Page 308
Fixing Unit, Select [LTR], then press [Next].
View all Canon imageCLASS MF7460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 308 highlights
Before Using the Machine 1 Original and Paper 2 Copying 3 Sending and Receiving 4 Printing and Scanning 5 Network (imageCLASS 6 MF7480/MF7470 Only) Remote UI (imageCLASS 7 MF7480/MF7470 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 ˙ Fixing Unit If black streaks appear on the printed page, the fixing unit in the main unit may be dirty. Should this occur, use the Fixing Unit Cleaning function to clean the fixing unit. The fixing unit should also be cleaned each time the cartridge is replaced. Print the cleaning pattern on LTR paper for cleaning the fixing unit. 1. Press (Additional Functions). 2. Press [Adjustment/Cleaning]. 3. Press [Fixing Unit Cleaning]. 4. Press [Cleaning Sheet Print]. The cleaning paper is printed. You will use this paper as the cleaning paper. 5. Open the stack bypass. Table of Contents Index Back Previous Next TOP 6. Load the cleaning paper with the printed side facing up, inserting the white edge into the stack bypass first. 7. Select [LTR], then press [Next]. 8. Select [Plain], then press [OK]. 9. Press [Start]. While the fixing unit is being cleaned, the screen below appears. - Cleaning the fixing unit takes approximately 100 seconds. - The cleaning process cannot be canceled. Please wait until it is completed. The display returns to the Adjustment/Cleaning screen. 9-3