Canon imageCLASS MF7460 imageCLASS MF7400 Series Reference Guide - Page 302
Restricting the USB Interface Port
View all Canon imageCLASS MF7460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 302 highlights
Before Using the Machine 1 Original and Paper 2 Copying 3 Sending and Receiving 4 Printing and Scanning 5 Network (imageCLASS 6 MF7480/MF7470 Only) Remote UI (imageCLASS 7 MF7480/MF7470 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 Restricting the USB Interface Port You can specify whether to accept or reject jobs by restricting the connection to the USB port. 1. Press (Additional Functions). 2. Press [System Settings Use USB Display]. If the System Manager ID and System Password have been set, enter the System Manager ID and System Password using - (numeric keys), then press (Log In/Out) to enter the System Settings menu. The Use USB Display screen appears. 3. Select [On] or [Off], then press [OK]. [On]: The machine accepts jobs through the USB port. [Off ]: The machine does not accept jobs through the USB port. 4. Press [Done] repeatedly until the Basic Features screen appears. The Remote UI is enabled only after you restart the machine (the main power switch is turned off, and then back on). Table of Contents Index Back Previous Next TOP 8-20