Canon imageCLASS MF7460 imageCLASS MF7400 Series Reference Guide - Page 349
No response. imageCLASS MF7480/MF7470 Only, LTR Load paper.
View all Canon imageCLASS MF7460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 349 highlights
Before Using the Machine 1 Original and Paper 2 Copying 3 Sending and Receiving 4 Printing and Scanning 5 Network (imageCLASS 6 MF7480/MF7470 Only) Remote UI (imageCLASS 7 MF7480/MF7470 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 Load Paper. Description Action Description Action LTR Load paper. Description Action Action The machine has run out of paper. No more prints can be made. Load paper. (See "Set Up the Machine," in the Starter Guide.) The paper drawer is not inserted correctly. Insert the paper drawer properly. (See "Set Up the Machine," in the Starter Guide.) The optimum paper size selected by the Automatic Paper Selection mode is not available in the machine. Load the indicated paper size into the machine. If you press (Start) while this message is displayed, prints are made with the currently selected paper size. When the message continues to be displayed even if the indicated paper size is loaded, set Drawer Eligibility For APS/ADS in Common Settings (from the Additional Functions screen) for that paper drawer to [On]. (See "Automatic Paper Selection/Automatic Drawer Switching," on p. 2-21.) Table of Contents Index Back Previous Next TOP No response. (imageCLASS MF7480/MF7470 Only) Description The server was not running when you tried to send. Action Check the destination. Description The network connection was lost when you tried to send. (Either you could not connect to the destination or the connection was lost before the job could complete.) Action Check the status of the network. Description A TCP/IP error occurred when you tried to send an e-mail or I-fax. Action Check that the network cables and connectors are properly connected. No response from the server. Check the settings. (imageCLASS MF7480/MF7470 Only) Description The specified server settings are incorrect, or the server is not turned ON. Alternatively, the machine's TCP/IP resources may be low. Action Wait for a while, and try browsing again. If you still fail, try selecting another server. Out of resources. Wait for a moment, then perform operation again. (imageCLASS MF7480/MF7470 Only) Description You cannot browse the network due to a lack of TCP/IP resources. This may be because documents have just been continuously sent or are being continuously sent through FTP or Windows (SMB). Action Wait for a while, and try browsing again. 10-19