Canon imageCLASS MF7460 imageCLASS MF7400 Series Reference Guide - Page 395

Before Using the Machine 1 Original and Paper 2 Copying 3 Sending and Receiving 4 Printing and Scanning 5 Network (imageCLASS 6 MF7480/MF7470 Only) Remote UI (imageCLASS 7 MF7480/MF7470 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 Back Previous Next TOP Communications Settings Gamma Value for Color Send Jobs*1 Sets the gamma value for color scanned data. If the set value corresponds to the gamma value at the recipient's machine, the scan exposure of the output data at the recipient's machine is automatically adjusted to the level best suited to the quality of the original. (Gamma 1.8, Gamma 2.2, Gamma 1.0, Gamma 1.4) Sharpness Sets the contrast of the images you scan. (1-7) Register Favorites Button Stores destinations with it send settings in favorites buttons. Color TX Scan Settings*1 Sets the priority for color scanned data. Selecting Speed Priority reduces the time spent in sending the document, but results in low quality images. Conversely, selecting Image Priority increases the time spent in sending the document, but results in high quality images. - Speed Priority - Image Priority Default Screen for Send Sets whether the [Favorites], [One-touch] tab, or the Send Basic Features screen is displayed when the power is turned on, (Reset) is pressed, or the Auto Clear mode is activated. - Favorites Buttons - One-touch Buttons - Initial Function Initialize TX Settings Restores the TX Settings to their default settings. However, Retry Times, Unit Name, and TX Terminal ID settings are not initialized. RX Settings Sets the reception features. 2-Sided Print Sets whether the machine prints received documents on both sides of the paper. (See "TwoSided Printing," on p. 4-71.) - Off - On *1 Indicates the item that appear only for the imageCLASS MF7480. Table of Contents Index 11-12