Canon imageCLASS MF7460 imageCLASS MF7400 Series Reference Guide - Page 51

Before Using the Machine 1 Original and Paper 2 Copying 3 Sending and Receiving 4 Printing and Scanning 5 Network (imageCLASS 6 MF7480/MF7470 Only) Remote UI (imageCLASS 7 MF7480/MF7470 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 Original Requirements Type Size Weight Quantity Platen Glass - Plain paper - Thick originals - Photographs - Small originals (e.g., index cards) - Special types of paper (e.g., tracing paper*1, transparencies*1, etc.) - Book (Height: max. 1" (24 mm)) Max. 8 1/2" x 11 5/8" (Max. 216 x 297 mm) Max. 4.4 lb (2 kg) 1 sheet Feeder Plain paper (Multipage originals or one page originals) 11" x 17", LGL, LTR, STMT 16 to 28 lb bond (52 to 105 g/m2) LTR: 50 sheets (22 lb bond (80 g/m2)) LGL/11" x 17": 25 sheets (22 lb bond (80 g/m2)) STMT:50 sheets (22 lb bond (80g/m2)) *1 When copying a transparent original such as tracing paper or transparencies, use a piece of plain white paper to cover the original after placing it face-down on the platen glass. Back Previous Next TOP ˔ Do not place the original on the platen glass or into the feeder until the glue, ink or correction fluid on the original is completely dry. ˔ Do not place the following types of originals into the feeder: - Wrinkled or creased paper - Carbon paper or carbon-backed paper - Curled or rolled paper - Coated paper - Torn paper - Onion skin or thin paper - Originals with staples or paper clips attached - Paper printed with a thermal transfer printer - Originals with tears or large binding holes - Severely curled originals or originals with sharp folds - Transparencies and other highly transparent originals Table of Contents Index 2-3