Canon imageCLASS MF7460 imageCLASS MF7400 Series Reference Guide - Page 84
Reserved Copy, Reserving Copy Jobs
View all Canon imageCLASS MF7460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Before Using the Machine 1 Original and Paper 2 Copying 3 Sending and Receiving 4 Printing and Scanning 5 Network (imageCLASS 6 MF7480/MF7470 Only) Remote UI (imageCLASS 7 MF7480/MF7470 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 Reserved Copy You can set the machine to scan originals even while it is printing or waiting to process a job. - You can reserve up to five copy jobs, including the current job. - You can set different copy modes and paper sources for each reserved job. ˙ Reserving Copy Jobs Reserved printing can be specified in the following cases: ˔ While the Machine Is Waiting You can specify copy settings or scan originals while the machine is in the waiting state, such as when after a paper jam is cleared. Copying automatically begins when the machine is ready. The message appears on the touch panel display when the machine is able to process reserved copying. ˔ While the Machine Is Printing You can specify copy settings for a new job while the machine is printing. Copying of the new job automatically begins when the current job is complete. You can specify reserved copying while the machine is in the waiting state in the following cases: - After a paper jam is cleared - After a cover on the main unit is opened and closed Table of Contents Index Back Previous Next TOP 1. Press [Done] on the pop-up screen that appears while the machine is printing. If the job displayed on the touch panel display is from a function other than the Copy function, press [Done] , then (COPY) to display the Copy Basic Features screen. This part of the procedure is not necessary if the machine is in the waiting state. 2. Place your originals. 3. Set the desired copy modes and paper source. To cancel a previously set copy mode, press (Reset). 4. Press (Start). If you specify a reserved copy job while the machine is in the waiting state, copying automatically begins when the machine is ready. If you specify a reserved copy job while the machine is printing, copying of the new job automatically begins when the current job is complete. If the following screen is displayed, press [OK], then try reserving the job again after the current job is complete. 3-13