Canon imageCLASS MF7460 imageCLASS MF7400 Series Reference Guide - Page 244
Select [On] or [Off] for <DNS Dynamic Update, Select [On] or [Off] for <Register Stateful
View all Canon imageCLASS MF7460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 244 highlights
Before Using the Machine 1 Original and Paper 2 Copying 3 Sending and Receiving 4 Printing and Scanning 5 Network (imageCLASS 6 MF7480/MF7470 Only) Remote UI (imageCLASS 7 MF7480/MF7470 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 Table of Contents Index 14. Enter the network domain name of the machine, then press [OK]. If you set Use DHCPv6 to [On], the IPv6 address of a DNS server you set manually will be overwritten. 15. Press [OK]. 16. Press [DNS Dynamic Update Settings]. 17. Select [On] or [Off] for . [Off ]: Does not use the DNS server dynamic update function. Skip to step 20. [On]: Enables you to automatically register the IPv6 address, host name, and domain name set for the machine in the DNS server using dynamic DNS updating if your environment includes a dynamic DNS server. Proceed to step 18. 18. Select [On] or [Off] for . [On]: Registers a manual address in the DNS server using dynamic DNS updating. [Off ]: Does not register a manual address in the DNS server using dynamic DNS updating. Back Previous Next TOP 19. Select [On] or [Off] for . [On]: Registers a stateful address in the DNS server using dynamic DNS updating. [Off ]: Does not register a stateful address in the DNS server using dynamic DNS updating. Windows 2000 Server and Windows Server 2003 do not support DHCPv6 servers. 20. Press [OK]. 21. Press [Done] repeatedly until the Additional Functions screen closes. 22. Restart the machine. Turn off the machine, wait at least 10 seconds, then turn it on. 6-43