Canon imageCLASS MF7460 imageCLASS MF7400 Series Reference Guide - Page 239
Select [On] or [Off]., Port Number Settings
View all Canon imageCLASS MF7460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 239 highlights
Before Using the Machine 1 Original and Paper 2 Copying 3 Sending and Receiving 4 Printing and Scanning 5 Network (imageCLASS 6 MF7480/MF7470 Only) Remote UI (imageCLASS 7 MF7480/MF7470 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 HTTP Settings You can restrict the use of Remote UI. 1. Press (Additional Functions). 2. Press [System Settings] → [Network Settings] → [TCP/IP Settings Use HTTP]. If the System Manager ID and System Password have been set, enter the System Manager ID and System Password using - (numeric keys), then press (Log In/Out) to enter the System Settings menu. The Use HTTP screen appears. 3. Select [On] or [Off]. [On]: Uses the Remote UI. [Off ]: Does not use the Remote UI. 4. Press [OK]. 5. Press [Done] repeatedly until the Additional Functions screen closes. 6. Restart the machine. Turn off the machine, wait at least 10 seconds, then turn it on. Back Previous Next TOP Port Number Settings Depending on your network environment, you can change the port number for each protocol. 1. Press (Additional Functions). 2. Press [System Settings] → [Network Settings] → [TCP/IP Settings Port Number Settings]. If the System Manager ID and System Password have been set, enter the System Manager ID and System Password using - (numeric keys), then press (Log In/Out) to enter the System Settings menu. The Port Number Settings screen appears. 3. Press a desired protocol key, then enter the number using - (numeric keys). 4. Press [OK]. 5. Press [Done] repeatedly until the Additional Functions screen closes. 6. Restart the machine. Turn off the machine, wait at least 10 seconds, then turn it on. Table of Contents Index 6-38