Canon imageCLASS MF7460 imageCLASS MF7400 Series Reference Guide - Page 397

Before Using the Machine 1 Original and Paper 2 Copying 3 Sending and Receiving 4 Printing and Scanning 5 Network (imageCLASS 6 MF7480/MF7470 Only) Remote UI (imageCLASS 7 MF7480/MF7470 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 Table of Contents Index Communications Settings Continue Printing When Toner Is Out Fax Settings User Settings Unit Telephone # Tel Line Type Monitor Volume Control TX Settings ECM TX Pause Time Auto Redial Redial Times Redial Interval Transmission Error Redial Back Previous Next TOP Sets whether the machine continues printing received documents and reports when it is running out of toner. If you set the machine not to continue printing, the machine stops printing when the toner starts to run out, and automatically stores the received documents in memory. - Off - On Sets the fax features. Specifies the basic operation settings in the fax mode. Registers your fax number (max. 20 characters, including spaces). (See "Set the Machine for Sending Documents," in the Starter Guide.) Selects the telephone line type. (See "Set the Machine for Sending Documents," in the Starter Guide.) - Pulse - Tone Sets the volume for the monitor tone that this machine sounds during a fax transmission. Sets the transmission features. Sets whether the ECM (Error Correction Mode) transmission is activated. - On - Off Sets the pause time when you insert pause into the dialing sequence. (1sec−15sec) Sets whether to redial automatically when the other line is busy or a transmission error occurs. (See "Setting Automatic Redialing (Fax) ," on p. 4-39.) Sets the number of retries. (1 times−10 times) Sets period of time before redialing. (2 min.−99 min.) Sets whether the machine redials automatically when transmission error occurs. - On - Off 11-14