Canon imageCLASS MF7460 imageCLASS MF7400 Series Reference Guide - Page 418
Ethernet type 10Base-T/100Base-TX automatically., Get Printer Management Information
View all Canon imageCLASS MF7460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 418 highlights
Before Using the Machine 1 Original and Paper 2 Copying 3 Sending and Receiving 4 Printing and Scanning 5 Network (imageCLASS 6 MF7480/MF7470 Only) Remote UI (imageCLASS 7 MF7480/MF7470 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 Table of Contents Index Back Previous Next TOP System Settings Off On Server Workgroup Comment LM Announce SNMP Settings Use SNMP On Community Name Writable SNMP Get Printer Management Information from Host Off Enable Dedicated Port Ethernet Driver Settings Auto Detect On SMB client is not used. SMB client is used. Enters the NetBIOS name of the machine. Enters the name of the workgroup the machine belongs to. Enters a comment about the printer. Sets if the machine notifies the LAN Manager of its existence. - Off - On Sets detailed information about SNMP. Sets whether to activate SNMP. Activates SNMP. Sets SNMP community name (default: public). Enables computers on the network to access the machine and modify its settings. - On - Off Sets whether to get printer management information from host. Deactivates SNMP. Sets or browses detailed information on the machine with a Canon printer driver or utility. - On - Off Specifies the type of network connection. Selects the detection method of Ethernet driver. Sets the machine to determine the communication mode (Half duplex/Full duplex) and Ethernet type (10Base-T/100Base-TX) automatically. 11-35