Canon imageCLASS MF7460 imageCLASS MF7400 Series Reference Guide - Page 334
original positions., touch panel display, and remove any jammed
View all Canon imageCLASS MF7460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 334 highlights
Before Using the Machine 1 Original and Paper 2 Copying 3 Sending and Receiving 4 Printing and Scanning 5 Network (imageCLASS 6 MF7480/MF7470 Only) Remote UI (imageCLASS 7 MF7480/MF7470 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 - Do not force a jammed original or paper out of the machine. Contact Canon Customer Care Center if needed. - When a paper jam occurs in the feeder, you cannot continue operating the machine. Follow the instructions on the touch panel display to remove the jammed paper. (See "Feeder," on p. 10-5.) - If paper is jammed in several locations, remove the jammed paper in the order indicated on the touch panel display. 1. Inspect all paper jam locations indicated on the touch panel display, and remove any jammed paper. See the appropriate pages below for instructions on finding and removing jammed paper. Or, you can follow the instructions on the touch panel display. If jammed paper tears while it is being removed, be sure to remove any remaining pieces from inside the machine. - If the machine's power is turned off when there is a paper jam, detection of paper jams in the paper drawers is not possible after the power is turned back on. Clear paper jams without turning the power off. - Some areas that are shown to have paper jams may not actually have paper jams. However, always check all locations indicated on the touch panel display in the order that is given. - When paper is jammed in several locations, the following image with the black circles appears on the screen. Table of Contents Index Back Previous Next TOP ᶃ Feeder (See "Feeder," on p. 10-5.) ᶄ Stack Bypass (See "Stack Bypass," on p. 10-7.)/Fixing Unit (See "Fixing Unit (Inside the Main Unit)," on p. 10-8.) ᶅ Duplex Unit (See "Duplex Unit," on p. 10-11.) ᶆ Paper Drawer 1 (See "Paper Drawer 1," on p. 10-13.) ᶇ Paper Drawer 2 (See "Paper Drawer 2," on p. 10-15.) 2. After you have removed all of the jammed paper in the locations indicated on the touch panel display, restore all levers and covers to their original positions. 3. Continue to follow the procedure and instructions on the touch panel display. Once you have cleared all of the jammed paper in locations other than the feeder, printing or copying resumes. If there is paper that still needs to be removed, a screen indicating how to clear that paper jam appears on the touch panel display. Repeat the procedure from step 1. You do not have to re-enter the number of copies or prints, even if you are printing multiple sets. The machine automatically recalculates the number of copies or prints to make based on the number of sheets that have jammed. 10-4