Canon imageCLASS MF7460 imageCLASS MF7400 Series Reference Guide - Page 63

Before Using the Machine 1 Original and Paper 2 Copying 3 Sending and Receiving 4 Printing and Scanning 5 Network (imageCLASS 6 MF7480/MF7470 Only) Remote UI (imageCLASS 7 MF7480/MF7470 Only) System Settings 8 Maintenance 9 Troubleshooting 10 Appendix 11 Curled paper may cause a paper jam. - If there is difficulty in straightening out curled paper, curl the front edges of the paper upward, as shown below. - To print on the back side of preprinted paper, load the preprinted paper face up into the stack bypass, as shown in the illustration below. The screen for selecting the paper size appears. Table of Contents Index Back Previous Next TOP - When loading paper into the stack bypass, align the paper stack neatly between the slide guides. If the paper is not loaded correctly, a paper jam may occur. - If you are printing on heavyweight paper or envelopes using the stack bypass, and find that the paper or envelopes are not being fed smoothly or evenly through the stack bypass, remove the paper or envelopes, curl the feeding edges upward approximately 1/8" (3 mm), and then reload the paper or envelopes. Curling the feeding edges enables the rollers to grip the paper or envelopes as they are fed into the stack bypass. - If there are instructions on the paper package about which side of the paper to load, follow those instructions. - When the paper is loaded into the stack bypass, the side facing down is the one printed on. - If problems, such as poor print quality or paper jams occur, try turning the paper stack over and reload it. - For more information on the print direction of preprinted paper (paper which has logos or patterns already printed on it), see "Loading Preprinted Paper," on p. 2-23. 2-15