HP 2700n HP Color LaserJet 2700 - Software Technical Reference - Page 198
Output Protocol, Send CTRL-D Before Each Job, Convert Gray Text to PostScript Gray
View all HP 2700n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 198 highlights
Output Protocol This control specifies the protocol that the HP Color LaserJet 2700 uses for print jobs. Three options are available: ● Click ASCII to send data in ASCII format (7-bit), which might take longer to print but can be sent through any I/O channel, such as a USB or network port. ● Click TBCP (Tagged Binary Communications Protocol) to send all data in binary (8-bit) format, except special control characters. The binary formats can be sent over USB or serial communications ports at a faster rate than by sending data in ASCII format. ● Click Binary to send all data in binary (8-bit) format, except special control characters. The binary formats can be sent over USB communications ports at a faster rate than by sending data in ASCII format. Send CTRL-D Before Each Job This option specifies whether the HP Color LaserJet 2700 printer will be reset at the beginning of every .PS document. The default setting is No. Ctrl-D resets the printer to its default setting to ensure that previous print jobs do not affect the current print job. Ctrl-D might cause a print job to fail if the printer is connected through a network. If the document fails to print when sent to a printer connected through a USB port, change No to Yes. Send CTRL-D After Each Job This option specifies whether the HP Color LaserJet 2700 printer will be reset at the end of every .PS document. The default setting is Yes. Ctrl-D resets the printer to its default setting to ensure that future print jobs are not affected by the current print job. Ctrl-D might cause a print job to fail if the printer is connected through a network. If the document fails to print when sent to a network printer, change Yes to No. Convert Gray Text to PostScript Gray This option specifies whether to convert the true gray (RGB value) in text to the gray that the PS Emulation Unidriver provides. The default setting is No. Convert Gray Graphics to PostScript Gray This option specifies whether to convert the true gray (RGB value) in graphics to the gray that the PS Emulation Unidriver provides. The default setting is No. Add Euro Currency Symbol to PostScript Fonts This option specifies whether to augment the device fonts with the euro character. The default setting is Yes. Job Timeout This option specifies how long the document can take to get from the computer to the HP Color LaserJet 2700 printer before the printer stops trying to print the document. By specifying 0 seconds, the printer continues trying to print indefinitely. The default setting is 0 seconds. Use the spin box to change this value to a maximum of 32,767 seconds. HP PCL 6 and PS emulation unidrivers for MS Windows 180 Chapter 4 HP PCL 6 and PS emulation unidrivers for MS Windows ENWW