HP Q7815A HP LaserJet P3005 - User Guide - Page 136
Tray Xx Empty <type> <size>, Size Mismatch In Tray Xx
View all HP Q7815A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
Control panel message Restoring factory settings RFU LOAD ERROR SANITIZING DISK X% COMPLETE alternates with DO NOT POWER OFF Setting saved SIZE MISMATCH IN TRAY XX alternates with Ready Sleep mode on STANDARD TOP BIN FULL alternates with Remove all paper from bin Tray X alternates with To change size or type press TRAY XX EMPTY alternates with Ready TRAY XX OPEN For help press alternates with Ready TRAY XX OPEN OR EMPTY alternates with Ready TYPE MISMATCH IN TRAY XX alternates with Ready Description Recommended action The device is restoring factory settings. An error has occurred during a firmware upgrade. No action necessary. ● Reinstall the firmware. ● If the problem persists, contact HP Support. The memory disk is being sanitized. This process might take up to an hour. During this time, no jobs can be printed. Do not turn off the device. Wait for the process to complete. The device automatically restarts at the end of the sanitation process. A menu selection has been saved. No action necessary. The tray is loaded with a media size that is ● different than the size for which the tray is configured. Printing can continue from other trays, but not from this one. ● Make sure the media guides are adjusted correctly. In the PAPER HANDLING menu, configure the tray for the correct size. The device is in the sleep mode. Any button No action necessary. The device press or the receipt of data clears sleep automatically exits sleep mode. mode. The output bin is full. Printing cannot continue. Empty the output bin. Printing resumes automatically. The device is reporting the current configuration of tray X. The tray is empty, but the current print job does not require this tray. No action necessary. Press to clear the message. Press to change the type or size. See Load media for more information. Fill the tray. The message indicates the type and size of media for which the tray is currently configured. The tray is open, but printing can continue. Close the tray. The tray is open or empty, but the current print job does not require this tray. Close or fill the tray. The tray is loaded with a media type that is different than the type for which the tray is configured. Printing can continue from other trays, but not from this one. In the PAPER HANDLING menu, configure the tray for the correct type. 124 Chapter 7 Problem solving ENWW