HP Q7815A HP LaserJet P3005 - User Guide - Page 164
Solve Linux problems
View all HP Q7815A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 164 highlights
When connected with a USB cable, the device does not appear in the Macintosh Print Center after the driver is selected. Cause Solution This problem is caused by either a software or a hardware component. Software problem-solving ● Check that your Macintosh supports USB. ● Verify that your Macintosh operating system is Mac OS X V10.1 or later. ● Ensure that your Macintosh has the appropriate USB software from Apple. Hardware problem-solving ● Check that the device is turned on. ● Verify that the USB cable is connected correctly. ● Check that you are using the appropriate high-speed USB cable. ● Ensure that you do not have too many USB devices drawing power from the chain. Disconnect all of the devices from the chain, and connect the cable directly to the USB port on the host computer. ● Check to see if more than two nonpowered USB hubs are connected in a row on the chain. Disconnect all of the devices from the chain and connect the cable directly to the USB port on the host computer. NOTE The iMac keyboard is a nonpowered USB hub. Solve Linux problems For information about Linux problem solving, go to the HP Linux support Web site: hp.sourceforge.net/. 152 Chapter 7 Problem solving ENWW