Icom IC-2820H Instruction Manual - Page 104
Transmitting a DTMF tone sequence
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
10 DTMF MEMORY ENCODER ■ Transmitting a DTMF tone sequence D Automatic transmission (DTMF memory) qPush and hold [TONE•DTMF] for 1 sec. to enter DTMF set mode. wRotate [DIAL] to select "DTMF MEMORY," then push [MAIN•BAND] to enter DTMF memory screen. eRotate [DIAL] to select the desired DTMF memory channel to be transmitted then push [BACK](V/MHz•SCAN) (Right band's). • Returns to DTMF set mode screen. rRotate [DIAL] to select "AUTO TX," then push [MAIN•BAND]. t Rotate [DIAL] to select "ON," then push [MAIN•BAND]. • "☎" appears. yPush [BACK](V/MHz•SCAN) (Right band's) to exit from DTMF set mode. u Push [PTT] to transmit the selected DTMF memory content. iTo cancel the DTMF tone sequence automatic transmis- sion, select "OFF" in step t. • When the DTMF encoder is turned ON continuously, each push of the PTT transmits the previously selected DTMF tone sequence. z Push [FUNC] then [LOW 6(DTMF)] to turn the DTMF DTMF memory encoder ON. • "☎" appears. x Push [PTT] to transmit the previously selected DTMF memory. c Push [FUNC] then [SET B(D-OFF)] to cancel the DTMF memory encoder. • When the DTMF encoder is turned ON continuously, each push of the PTT transmits the previously se- lected DTMF tone sequence. 83