Icom IC-2820H Instruction Manual - Page 136
Other Functions
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
15 OTHER FUNCTIONS ■ Microphone keys The supplied HM-133's (optional for some versions) [F-1] and [F2] keys memorize the transceiver conditions. The [UP]/[DN] keys of the standard or an optional microphone (other than the HM-133) can be assigned functions like the function keys on the transceiver's front panel. D [F-1]/[F-2] keys on HM-133 The following conditions in the main band or both left and right bands can be memorized into [F-1] and [F-2] keys, independently. Operating frequency, Mode (VFO/Memory/Call channel with channel number), Memory name, Repeater setting (offset direction and frequency, tone ON/OFF and frequency), Transmit output power level, Tone/DTCS squelch (ON/OFF, frequency/code and polarity), Tuning step, weather alert (USA version only), Operating mode selection (FM/FM-N/AM/AMN/DV†), Call sign (station and repeater),† Call sign/digital code squelch (ON/OFF and digital code),† Set mode settings,* GPS set mode settings,* GPS-A set mode settings,* Display set mode settings,* Sounds set mode settings,* DV set mode settings,*, † *Only when storing both band's conditions †Available only when optional UT-123 is installed. 115 ➥ Programming the main band condition [F-1]/[F-2] Set the desired contents of each condition in the main band, then push [F-1]/[F-2] for 1 sec. • 3 beeps sound. ➥ Recalling the main band condition Push [F-1]/[F-2] momentarily. ➥ Programming the both bands condition After setting the desired contents of each condition in the both bands, push [FUNC] then push [F-1]/[F-2] for 1 sec. • 3 beeps sound. ➥ Recalling the both bands condition Push [FUNC] then [F-1]/[F-2] momentarily. D [UP]/[DN] keys on a microphones (other than HM-133) The following functions are assigned to the [UP]/[DN] keys on the other microphones (HM-154, etc.) in set mode. • Default setting [UP] : channel up; push and hold to start scan, push again to stop scan. [DN] : channel down; push and hold to start scan, push again to stop scan. See page 102 for assignable function details.