Icom IC-2820H Instruction Manual - Page 58
Your own call sign programming
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
5 DV MODE OPERATION (Optional UT-123 is required) D Your own call sign programming Your own call sign must be programmed for both digital voice and low-speed data communications (including GPS transmission). q Push [F• ] to display the function guide. w Push [MENU](V/MHz•SCAN) (Right band's) to enter MENU screen. eRotate [DIAL] to select "CALL SIGN MEMORY" then push [MAIN•BAND]. rRotate [DIAL] to select "MY CALL SIGN MEMORY" then push [MAIN•BAND]. tRotate [DIAL] to select the desired call sign channel (M01 to M06), then push [MAIN•BAND]. u Repeat step y until your own call sign is programmed. iPush [>](M/CALL•MW) (Left band's) several times to move the cursor to "/" position. • A to Z, 0 to 9 and "/" characters are available. • If no note is required, skip steps i and o, go to step !0. o Repeat step y to program the desired 4-character note. !0Push [MAIN•BAND] to store the programmed call sign (or with note). yRotate [DIAL] to select the desired character, then push [>](M/CALL•MW) (Left band's) to move the cursor right. • Push [