Icom IC-2820H Instruction Manual - Page 124
DV SET MODE items
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
14 MENU SCREEN OPERATION ■ DV SET MODE items The following items are selectable by optional UT-123 is installed into the IC-2820H. D Auto reply This function replies to an individual station call even you are away from the transceiver. After a manual transmission (pushing [PTT]), the Auto Reply setting returns to OFF automatically. • OFF : No reply is performed even a call is received. (default) • ON : Sets caller's call sign and reply to the call with the set own call sign automatically. • VOICE : Reply to the call with the recorded voice memory. D Digital code Sets the desired digital code for digital code squelch operation. A total of 100 codes (00-99) are available. (default: 00) D DV data TX During low-speed data operation, auto data transmission function is available. This function transmits when data has been input from PC via the [DATA] jack. (default: PTT) D Digital monitor Sets the desired monitoring mode during DV mode operation from "AUTO," "DIGITAL" and "ANALOG." • AUTO : The transceiver sets monitoring mode to FM and DV according to the received signal. (default) • DIGITAL : Monitors in DV mode. • ANALOG : Monitors in FM mode. D Digital repeater setting When accessing a digital repeater with a call sign different than is programmed, the repeater call sign can be stored into "RPT1" and/or "RPT2" automatically by reading the repeater's transmission. The stored repeater's call sign can be re-called when selecting the repeater call sign. (default: OFF) D RX call sign auto write When an individual station call is received, the calling station call sign can be automatically set in "YOUR." (default: OFF) 103