Icom IC-2820H Instruction Manual - Page 16
Antenna installation
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
QUICK REFERENCE GUIDE D Antenna installation • Antenna location To obtain maximum performance from the transceiver, select a high-quality antenna and mount it in a good location. It is not necessary to use radials on a magnetic mount ("mag mount") antenna. Roof-mount antenna (Drill a hole or use a magnetic mount.) Trunk-mount antenna Gutter-mount antenna • Antenna connector The antenna uses a PL-259 connector. • PL-259 CONNECTOR 30 mm Coupling ring 10 mm (soft solder) 10 mm Soft solder 1-2 mm q Slide the coupling ring down. Strip the cable jacket and tin. w Strip the cable as shown at left. Soft solder the center conductor. solder solder e Slide the connector body on and solder it. r Screw the coupling ring onto the connector body. (10 mm ≈ 3⁄8 in) NOTE: There are many publications covering proper antennas and their installation. Check with your local dealer for more information and recommendations. To antenna for Tx/Rx To antenna for diversity reception IX