Icom IC-2820H Instruction Manual - Page 84

Programming a memory channel via the microphone

Get Icom IC-2820H PDF manuals and user guides View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals

Page 84 highlights

6 MEMORY MODE OPERATION D Programming a memory channel via the microphone The microphone can also be used to program memMW ory channels. z Set the desired frequency in VFO mode. ➥ Push [VFO/LOCK] to select VFO mode. ➥ Set the frequency using the keypad. ➥ Set other data (e.g. offset frequency, duplex direction, subaudible tone encoder ON/OFF and its frequency), if necessary. x Push [MR/CALL] to enter memory mode. c Push [ENT C(T-OFF)], then set the desired memory chan- nel using the keypad. v Push [VFO/LOCK] to select VFO mode. b Push [FUNC] then push and hold [CLR A(MW)] for 1 sec. to program. ➥ 3 beeps may sound and the VFO contents (including the subaudible tone frequency, etc.) are programmed. ➥ Memory channel number increases when continuing to push [CLR A(MW)] after programming. [EXAMPLE]: Programming 145.870 MHz into memory channel 20 (blank channel) via the microphone. Push , Push MR/ CALL then Push "Beep Push 63 " " Beep " Beep " Beep " Push then ➠ for 1 sec. and continue to push "Beep

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
63
6
MEMORY MODE OPERATION
D
Programming a memory channel via the microphone
The microphone can also be used to program mem-
ory channels.
z
Set the desired frequency in VFO mode.
➥
Push [VFO/LOCK] to select VFO mode.
➥
Set the frequency using the keypad.
➥
Set other data
(e.g. offset frequency, duplex direction, sub-
audible tone encoder ON/OFF and its frequency)
, if neces-
sary.
x
Push [MR/CALL] to enter memory mode.
c
Push [
ENT
C(T-OFF)], then set the desired memory chan-
nel using the keypad.
v
Push [VFO/LOCK] to select VFO mode.
b
Push [FUNC] then push and hold [
CLR
A(MW)] for 1 sec. to
program.
➥
3 beeps may sound and the VFO contents
(including the
subaudible tone frequency, etc.)
are programmed.
➥
Memory channel number increases when continuing to
push [
CLR
A(MW)] after programming.
MW
[EXAMPLE]:
Programming 145.870 MHz into memory channel 20 (blank channel) via the microphone.
Beep
“
±
Beep
“
±
Beep
Beep
Beep
“
±
“
±
“
±
“
±
“
±
Push
,
Push
then
for 1 sec. and continue to push
➠
MR/
CALL
Push
then
Push
Push