Icom IC-2820H Instruction Manual - Page 37
DVFO and memory modes
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
SETTING A FREQUENCY 2 BANK Y/Z z Push [BAND] to select main band. x Push and hold [BAND] for 1 sec. to enter fre- quency band selection. • The frequency band is displayed. c Push [Y]/[Z] to select the desired frequency band. v Push [CLR A(MW)] (or [BAND]) to exit the con- dition, and return to frequency indication. ✔ About extra frequency bands - USA and General versions only In addition to the 2 m and 70 cm ham bands, the IC-2820H USA and General versions have extra frequency bands for each left and right bands as follow. See the specifications for the available frequency bands for details. Frequency band initial* 127 136 146 222 375 440 500 900 Left band Right band *The frequency band initials are default indication only. Once the op- erating frequency is set in the band, the initial indication will be changed. ✔: Available, -: Not available D VFO and memory modes 1 The transceiver has 2 basic operating modes: VFO mode and memory mode. Select VFO mode first to set an operating fre- 2 quency. 3 4 [V/MHz•SCAN] 5 [M/CALL•MW] 6 7 8 9 VFO mode is selected. "X" indicator appears when 10 memory mode is selected. 11 ➥ Push the desired band's [V/MHz•SCAN] to select VFO mode. 12 • When VFO mode is already selected, the digits to the right of the 13 10 MHz or 1 MHz digits will disappear depending on version. In this case, push [V/MHz•SCAN] again (or twice depending on ver- 14 sion). ➥ Push [M/CALL•MW] to select memory mode. 15 • "X" indicator appears when memory mode is selected. 16 ➥ Push [VFO/LOCK] to select VFO mode. 17 VFO/LOCK ➥ Push [MR/CALL] to select memory mode. • The microphone controls the main band only. Push 18 [BAND] to toggle the main band, then push 19 [VFO/LOCK] or [MR/CALL], if necessary. 16