Icom IC-2820H Instruction Manual - Page 98
Programming scan edges via microphone
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
8 SCAN OPERATION D Programming scan edges via microphone z Push [MR/CALL] to select memory mode. MW x Select scan edge channel, 0A to9A using [Y]/[Z] or keypad. • Push [ENT C(T-OFF)] then push only 1 appropriate digit key, [VOLY 0(TONE-2)] to [SIMP 9(16-KEY-L)] then push [M(TONE-1)] or [SQLZ #(16KEY-L)] to select scan edge channels. "M" and "#" can be used for "A" and "B" respectively. c Set the desired frequency in VFO mode. ➥ Push [VFO/LOCK] to select VFO mode. ➥ Set the frequency via the keypad or [Y]/[Z]. v Push [FUNC], then push and hold [CLR A(MW)] for 1 sec. to program. • 3 beeps sound and VFO is automatically selected. • Memory channel number advances to the next scan edge channel, 1B to 9B when continuing to push [CLR A(MW)] after programming. b To program a frequency for the other scan edge channels, repeat steps z to v. [EXAMPLE]: Programming 145.800 MHz into scan edge 4A. Push Push Push Push Push 77 Push then " " Beep " Beep " Beep " ➠ for 1 sec. and continue to push "Beep