Icom IC-2820H Instruction Manual - Page 116
Code squelch
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
12 PAGER/CODE SQUELCH • PERSONAL CALLS This display appears when you are called with your ID code and the calling station's ID code is 444. "PGR" blinks. • GROUP CALLS This display appears when you are called with the group code (444), provided 444 has been programmed into code channel C3. Code channel • ERROR INFORMATION When the transceiver receives an incomplete code, "E" and previously received code appear. Previously received code. "E" (error) appears 95 ■ Code squelch When using code squelch you will only receive calls from stations which know your ID or group code. A 3-digit code is sent each time [PTT] is pushed in order to open the receiving station's code squelch prior to voice transmission. q Set the operating frequency. • Set the volume and squelch to the desired level as in normal operation. w Push [F• ] to display the function guide. e Push [MENU](V/MHz•SCAN) (Right band's) to enter the MENU screen. r Rotate [DIAL] to select "DUP/TONE..." then push [MAIN•BAND] to enter DUP/TONE set mode. t Rotate [DIAL] to select the "PGR/C-SQL" then push [MAIN•BAND]. y Rotate [DIAL] to set "C-SQL" then push [MAIN•BAND]. u Rotate [DIAL] to select "PGR MEMORY" then push [MAIN•BAND]. i Rotate [DIAL] to select the desired transmit code channel: ➥ Rotate [DIAL] to select the desired code channel. ➥ Push [BACK](V/MHz•SCAN) (Right band's) three times to return to frequency indication. • "C-SQL." appears. o Operate the transceiver in the normal way (push [PTT] to transmit; release [PTT] to receive). !0 To cancel the code squelch, enter "PGR/C-SQL" set item, then rotate [DIAL] to select "OFF" • "C-SQL" disappears.