Icom IC-2820H Instruction Manual - Page 110
DTCS polarity setting
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
11 TONE SQUELCH AND POCKET BEEP ■ DTCS polarity setting q Push [F• ] to display the function guide. w Push [MENU](V/MHz•SCAN) (Right band's) to enter MENU screen. e Rotate [DIAL] to select "DUP/TONE..." then push [MAIN•BAND]. r Rotate [DIAL] to select "DTCS POLARITY" then push [MAIN•BAND]. t Rotate [DIAL] to select the desired DTCS polarity then push [MAIN•BAND]. • BOTH N : Normal phase is used for both TX and RX. (Default) • TN-RR : Normal phase is used for TX; Reverse phase for RX. • TR-RN : Reverse phase is used for TX; Normal phase for RX. • BOTH R : Reverse phase is used for both TX and RX. z Push [SET B(D-OFF)] to enter set mode. SET x Push [Y]/[Z] several times to select B "DUP/TONE..." then push [SET B(D-OFF)]. c Push [Y]/[Z] several times to select "DTCS PO- LARITY" then push [SET B(D-OFF)]. v Push [Y]/[Z] to select the desired polarity then push [SET B(D-OFF)]. b Push [CLR A(MW)] to exit DUP/TONE set mode. y Push [BACK](V/MHz•SCAN) (Right band's) to exit from DUP/TONE set mode. 89