Icom IC-2820H Instruction Manual - Page 93
Call Channel Operation
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
7 CALL CHANNEL OPERATION ■ Call channel selection Call channel is a pre-programmed memory channel that can be accessed by simply pushing call channel button. ➥ Push the desired band's [M/CALL•MW] several times to select the call channel mode, then rotate the same band's [DIAL] to select the desired call channel. • "C0" or "C1" appears instead of memory channel number. • Push the [M/CALL•MW] several times to select memory mode, or push the same band's [V/MHz•SCAN] to select VFO mode. [M/CALL•MW] [DIAL] "C0" or "C1" appears ➥ Push and hold [MR/CALL] for 1 sec. to select MR/CALL the call channel mode then push [Y]/[Z] to select the desired call channel in the main band. • Push [MR/CALL] to select memory mode, or push [VFO/LOCK] to select VFO mode. ✔INFORMATION When the VFO mode is selected from the call channel, a small "c" appears instead of memory channel number. ■ Call channel copying 1 D Call➪VFO/Memory 2 qPush the desired band's [M/CALL•MW] several times to 3 select call channel mode, then rotate the same band's [DIAL] to select the desired call channel. 4 • "C0" or "C1" appears. wPush the same band's [M/CALL•MW] for 1 sec., then ro- 5 tate the [DIAL] to select the memory channel to copy the 6 contents to. • "X" indicator and memory channel number blink. 7 • To copy to the VFO mode, select "VFO" with the [DIAL]. 8 ePush and hold the same band's [M/CALL•MW] for 1 sec. to copy the contents. 9 10 z Push [MR/CALL] for 1 sec. then push [Y]/[Z] MR/CALL to select the desired call channel in the main 11 band. 12 x Push [FUNC], then [CLR A(MW)] for 1 sec. to MW copy the contents. 13 • To copy to the VFO only. 14 Y/Z 15 16 17 18 19 72