Icom IC-2820H Instruction Manual - Page 106
DTMF speed
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
10 DTMF MEMORY ENCODER ■ DTMF speed The rate at which DTMF values in memory send individual DTMF characters can be set to accommodate operating needs. q Push [F• ] to display the function guide. w Push [MENU](V/MHz•SCAN) (Right band's) to enter MENU screen. eRotate [DIAL] to select "DUP/TONE...," then push [MAIN•BAND]. rRotate [DIAL] to select "DTMF SPEED," then push [MAIN•BAND]. tRotate [DIAL] to select the desired speed as shown in the table below, then push [MAIN•BAND]. y Push [BACK](V/MHz•SCAN) (Right band's) twice to return DISPLAY INTERVAL 100 100 msec. 200 200 msec. 300 300 msec. 500 500 msec. to frequency indication. cps=characters/sec SPEED 5.0 cps 2.5 cps 1.6 cps 1.0 cps 85
85
10
DTMF MEMORY ENCODER
■
DTMF speed
The rate at which DTMF values in memory send individual
DTMF characters can be set to accommodate operating
needs.
q
Push
[
F
•
]
to display the function guide.
w
Push
[MENU](V/MHz•SCAN)
(Right band’s)
to enter MENU
screen.
e
Rotate
[DIAL]
to select
“DUP/TONE…,” then push
[MAIN•BAND]
.
r
Rotate
[DIAL]
to select
“DTMF SPEED,” then push
[MAIN•BAND]
.
t
Rotate
[DIAL]
to select the desired speed as shown in the
table below, then push
[MAIN•BAND]
.
y
Push
[BACK](V/MHz•SCAN)
(Right band’s)
twice to return
to frequency indication.
cps=characters/sec
DISPLAY
INTERVAL
SPEED
100
100 msec.
5.0 cps
200
200 msec.
2.5 cps
300
300 msec.
1.6 cps
500
500 msec.
1.0 cps