Icom IC-2820H Instruction Manual - Page 66
Repeater operation into another zone
View all Icom IC-2820H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
5 DV MODE OPERATION (Optional UT-123 is required) D Repeater operation into another zone qSet the desired repeater's frequency, offset and shift direction in the main band. (pgs. 30, 31) • Select DV mode in advance. (p. 21) w Set your own call sign. (p. 39) • See p. 37 for your own call sign programming. e Set the desired station call sign. (p. 40) • When making a CQ call Set the desired repeater's (in a different zone) call sign into "YOUR." The symbol "/" which stands for "CQCQCQ" is added at the 1st digit automatically. • See p. 38 for station call sign programming. r Set the repeater's call sign as follows; z Push [F• ] twice to display the function guide 2. xPush [CS](V/MHz•SCAN) (Left band's) to display the "CALL SIGN" screen. cRotate [DIAL] to select "RPT1," then push [MAIN•BAND]. • RPT1 CALL SIGN screen is displayed. vRotate [DIAL] to select the nearest repeater's call sign then push [BACK](V/MHz) (Right band's). • If the nearest repeater is a gateway repeater, program the re- peater's call sign with "G" in the 8th digit. bRotate [DIAL] to select "RPT2" then push [MAIN•BAND]. • RPT2 CALL SIGN screen is displayed. nRotate [DIAL] to select the gateway repeater's (in the same zone) call sign. • The call sign should have "G" in the 8th digit. • When gateway repeater call sign is set in "RPT1," select "NOT USE✱" for "RPT2" setting. mPush [BACK](V/MHz•SCAN) (Right band's) to exit "CALL SIGN" screen. t Push [PTT] to transmit; release to receive. 45